Structural Engineering

3D Structural Analysis and Design for Structural Steel Building Training Course

Introduction

This comprehensive training course provides engineers with the essential knowledge and practical skills needed for the 3D structural analysis and design of steel buildings. The curriculum is centered on modern structural engineering principles, advanced finite element analysis (FEA), and the application of industry-leading structural design software like STAAD.Pro, ETABS, and Tekla. Participants will learn to model complex structures, apply various load conditions, and perform code-compliant checks to ensure the structural integrity, safety, and economic viability of their designs. This program is an indispensable resource for professionals seeking to master the intricacies of steel structures, from conceptual design to detailed engineering, and to stay competitive in the rapidly evolving AEC (Architecture, Engineering, and Construction) industry.

3D Structural Analysis and Design for Structural Steel Building Training Course is meticulously crafted to bridge the gap between theoretical knowledge and real-world application. Through a hands-on, project-based approach, trainees will work on practical exercises and real-life case studies covering multi-story buildings, industrial sheds, and specialized structures. The focus is on developing a deep understanding of structural behavior, including topics like seismic analysis, wind load design, and steel connection design. By completing this training, professionals will not only gain proficiency in 3D modeling and analysis but also enhance their ability to create optimized, efficient, and sustainable steel structures that meet international and local building codes.

Programme Curriculum

3D Structural Analysis and Design for Structural Steel Building Training Course

Introduction

Course Duration

5 days

Course Objectives

Master 3D structural analysis and finite element modeling for steel buildings.
Gain proficiency in using structural analysis software
Understand load application and load combinations as per international building codes
Perform seismic analysis and wind load design for tall and complex structures.
Design and verify various steel members, including beams, columns, and trusses.
Specialize in steel connection design for both bolted and welded connections.
Conduct advanced analysis for stability, buckling, and P-delta effects.
Optimize steel designs for material efficiency and cost reduction.
Learn to interpret and post-process results from structural analysis.
Generate detailed structural reports and documentation.
Apply building information modeling (BIM) principles in a structural workflow.
Ensure all designs meet safety standards and are code-compliant.
Develop a portfolio of real-world case studies and completed projects.

Organizational Benefits

Reduces design cycles and manual errors through automation and precise 3D modeling.
Leads to safer, more reliable, and durable structures by identifying potential flaws early.
Optimizes material usage and minimizes construction rework and delays.
Ensures designs are aligned with the latest international and local building codes, reducing legal and regulatory risks.
Builds an expert in-house team capable of handling complex, high-value steel projects.
Facilitates seamless coordination between structural, architectural, and MEP teams.

Target Audience

Civil & Structural Engineers
Graduate Engineers
Engineering Consultants
Project Managers
Design & Drafting Professionals
Architects
Construction Professionals
Academic Researchers

Course Modules

Module 1: Fundamentals of Structural Analysis & Steel Behavior

Introduction to structural systems and 3D modeling.
Properties of steel and its behavior under various loads.
Review of essential mechanics of materials concepts.
Understanding different load types (dead, live, wind, seismic).
Case Study: Analysis of a Simple Steel Truss Bridge - This case study will walk participants through the manual calculation of forces and moments in a truss bridge before applying software to validate the results.

Module 2: 3D Structural Modeling with Software

Navigating the software interface (e.g., STAAD.Pro, ETABS).
Creating a structural model using nodes, beams, and plates.
Defining member properties, sections, and material assignments.
Applying supports, boundary conditions, and load cases.
Introduction to advanced meshing techniques for accurate analysis.

Module 3: Code-Compliant Load Generation & Combination

Applying gravity loads (dead and live loads) according to building codes.
Automated wind load generation based on building geometry.
Understanding and generating seismic loads using static and dynamic methods.
Creating and managing load combinations for various design scenarios.
Case Study: Seismic Design of a High-Rise Steel Building - Participants will apply seismic loads to a multi-story building model, perform dynamic analysis, and interpret results to ensure code compliance.

Module 4: Design of Steel Members

Design of compression members (columns) for axial loads and buckling.
Design of flexural members (beams) for bending and shear.
Design of tension members and their effective areas.
Verification of member capacity against applied loads and internal forces.
Introduction to plate girder design.

Module 5: Steel Connection Design

Principles of bolted connections, including shear and tension capacity.
Design of welded connections and weld strength calculations.
Designing beam-to-column and beam-to-beam connections.
Design of base plates for columns.
Case Study: Design of a Complex Moment Connection - Trainees will design a challenging moment connection between a beam and column, considering eccentric loads and potential failure modes.

Module 6: Advanced Structural Analysis Techniques

P-delta analysis for slender structures.
Lateral-torsional buckling and bracing design.
Introduction to response spectrum analysis for earthquake loads.
Performing buckling analysis and identifying failure modes.
Troubleshooting common modeling and analysis errors.

Module 7: Foundations & Detailing

Foundation design principles for steel buildings.
Interaction between superstructure and substructure.
Generating engineering drawings and detailed plans.
Principles of BIM integration for seamless workflows.
Understanding fabrication and erection requirements.

Module 8: Final Project & Industry Best Practices

Comprehensive design project covering a complete steel building.
Optimization for cost and efficiency.
Creating a final report and documentation.
Review of current industry trends and emerging technologies.
Case Study: Design of an Industrial Warehouse - The capstone project involves the complete design, analysis, and detailing of an industrial warehouse, from initial loads to final drawings.

Training Methodology

This course employs a dynamic, blended learning approach to ensure maximum engagement and knowledge retention. The methodology includes:

Instructor-Led Sessions.
Hands-On Workshops.
Real-World Case Studies.
Project-Based Learning.
Q&A and Group Discussions.
Continuous Assessment.

Register as a group from 3 participants for a Discount

Send us an email: info@fineskilltrainingcenter.org or call +254769199797

Certification

Upon successful completion of this training, participants will be issued with a globally- recognized certificate.

Tailor-Made Course

We also offer tailor-made courses based on your needs.

Key Notes

a. The participant must be conversant with English.

b. Upon completion of training the participant will be issued with an Authorized Training Certificate

c. Course duration is flexible and the contents can be modified to fit any number of days.

d. The course fee includes facilitation training materials, 2 coffee breaks, buffet lunch and A Certificate upon successful completion of Training.

e. One-year post-training support Consultation and Coaching provided after the course.

f. Payment should be done at least a week before commence of the training, to Fineskill Training Center account, as indicated in the invoice so as to enable us prepare better for you.

Skills & Software Covered

Structural engineering 3D modeling steel design

Programme Fee

Duration: 5 Days

Method: Online or Physical

Online Price: $1,000

Physical Price: $1,500

Certification: Accredited Certificate

View Available Dates 📄 Download Course Outline (PDF)

Available Sessions

Location

Month

Year

Oct 19 2026

19 Oct — 23 Oct 2026

💻 Online / Virtual session

Online $1,000