Oil and Gas

Training Course on Marine and Offshore Vessel Operations for Oil and Gas

Introduction

The global oil and gas (O&G) sector relies heavily on efficient, safe, and sustainable marine and offshore vessel operations. With increasing regulatory scrutiny, technological advancements, and heightened demand for skilled personnel, it is critical for maritime and offshore professionals to master key operational, safety, and compliance competencies. Training Course on Marine & Offshore Vessel Operations for Oil & Gas (O&G) is designed to empower industry professionals with practical, hands-on knowledge and best practices to optimize marine logistics, enhance vessel performance, and ensure environmental and personnel safety.

This industry-driven program leverages real-world case studies, expert-led modules, and scenario-based learning to provide a 360-degree understanding of marine vessel management, offshore logistics, risk assessment, and emergency response. Participants will gain in-depth insights into dynamic positioning, subsea operations, FPSO systems, and industry-specific regulatory frameworks such as MARPOL, SOLAS, and ISM Code—crucial for success in the high-stakes offshore oil and gas environment.

Programme Curriculum

Training Course on Marine & Offshore Vessel Operations for Oil & Gas (O&G)

Introduction

Course Objectives

Understand core principles of offshore vessel operations in the oil and gas industry.
Apply best practices in marine logistics and vessel movement planning.
Interpret and comply with IMO regulations, SOLAS, and MARPOL standards.
Analyze offshore support vessels (OSVs), DP vessels, and FPSO systems.
Conduct effective risk assessments and implement hazard control procedures.
Evaluate vessel maintenance planning and asset lifecycle management.
Apply emergency response and oil spill contingency planning strategies.
Master dynamic positioning operations and anchor handling techniques.
Implement safety management systems based on ISM Code.
Optimize fuel efficiency and environmental compliance.
Understand subsea operations, including ROVs and diving support.
Interpret chartering, marine insurance, and logistics contracts.
Leverage digital tools and data analytics for marine operations optimization.

Target Audience

Marine Engineers
Offshore Operations Managers
Safety Officers in O&G
Maritime Logistics Coordinators
Marine Surveyors
Port and Terminal Managers
Offshore Installation Managers (OIMs)
Naval Architects and Technical Superintendents

Course Duration: 10 days

Training Modules

Module 1: Introduction to Marine & Offshore Vessel Types

Classification of vessels: OSVs, DP vessels, FPSOs, and AHTS
Role of vessels in oil & gas offshore operations
Basic onboard systems and functions
Overview of international marine regulatory bodies
Vessel selection for offshore support operations
Case Study: Fleet optimization strategy for a West African oil field

Module 2: Offshore Vessel Navigation & Positioning

Navigational systems and chart interpretation
Use of GPS, AIS, and radar systems
Dynamic positioning (DP1, DP2, DP3) explained
Anchor handling and mooring techniques
Collision avoidance and navigation in congested zones
Case Study: DP system failure response in the Gulf of Mexico

Module 3: IMO, SOLAS, MARPOL, and ISM Code Compliance

Key marine compliance frameworks
Safety of Life at Sea (SOLAS) regulations
Pollution prevention under MARPOL
ISM Code and SMS implementation
Environmental risk mitigation
Case Study: MARPOL violation incident and its legal consequences

Module 4: Offshore Logistics & Marine Supply Chain

Offshore logistics lifecycle
Cargo planning and load-out procedures
Helicopter and marine crew transport logistics
Supply vessel scheduling and optimization
Inventory and material tracking systems
Case Study: Cost overrun in offshore supply chain—lessons learned

Module 5: Vessel Maintenance & Asset Integrity

Planned maintenance systems (PMS)
Condition monitoring tools
Hull integrity inspections
Lifecycle cost management
Spare parts and procurement best practices
Case Study: Hull failure incident in Arctic waters

Module 6: Emergency Response & Contingency Planning

Firefighting and rescue drills onboard
Oil spill containment and dispersal
Abandon ship and survival protocols
Coordination with coastal emergency services
HAZMAT response and safety zones
Case Study: Offshore blowout and coordinated emergency response

Module 7: Risk Assessment & HSE Offshore

Offshore hazard identification (HAZID)
Job Safety Analysis (JSA) procedures
HSE management systems
Risk matrix and controls implementation
PPE and confined space entry safety
Case Study: Near-miss analysis aboard a PSVs fleet

Module 8: Offshore Operations Planning & Mobilization

Project planning for marine operations
Site mobilization and demobilization logistics
Weather routing and marine forecasts
Crew planning and rostering
Budgeting for offshore marine projects
Case Study: Delayed mobilization and its impact on project timelines

Module 9: Dynamic Positioning & Anchor Handling

DP control systems and operation
Redundancy and power management
Anchor winch operation and chain catenary
Mooring analysis and simulation
Training requirements for DP operators
Case Study: Anchor drag incident during subsea installation

Module 10: FPSO Operations & Safety Protocols

FPSO systems overview: topsides, turrets, and moorings
Production, storage, and offloading procedures
FPSO vessel safety protocols
Crew operations and shift management
Maintenance challenges in FPSOs
Case Study: FPSO fire incident investigation and safety review

Module 11: Marine Environmental Management

Ballast water management
Waste handling and sewage discharge
Oil-water separator (OWS) operation
Marine ecosystem preservation initiatives
Port state control inspections
Case Study: Ballast water violation in Southeast Asia

Module 12: Subsea Operations & ROV/Diving Support

Introduction to ROV and AUV technologies
Diver safety and underwater procedures
Subsea pipeline inspection
Subsea intervention tools and winches
Communication systems for subsea support
Case Study: ROV failure and diver backup deployment in deepwater

Module 13: Maritime Contracts & Chartering

Types of maritime contracts: T/C, B/B, Voyage
Charter party clauses and disputes
Demurrage and despatch concepts
Marine insurance overview
Contract risk assessment
Case Study: Legal case study on charter party breach

Module 14: Marine Digitalization & Automation

Vessel performance monitoring systems
Digital twins and virtual simulation
IoT and predictive analytics onboard
Smart fleet management systems
Cybersecurity on vessels
Case Study: AI-enabled fleet management for cost savings

Module 15: Offshore Project Case Studies and Best Practices

Real-world offshore project retrospectives
Performance benchmarking
Lessons learned across multiple geographies
Crisis management and mitigation
Innovation adoption in O&G marine operations
Case Study: Integrated marine logistics in Brazil’s pre-salt basin

Training Methodology

Instructor-led classroom and virtual sessions
Interactive group discussions and breakout workshops
Multimedia presentations with real-life offshore footage
Scenario-based learning and hands-on case study analysis
Knowledge checks, quizzes, and final assessment
Access to post-course support and resources

Register as a group from 3 participants for a Discount

Send us an email: info@fineskilltrainingcenter.org or call +254769199797

Certification

Upon successful completion of this training, participants will be issued with a globally- recognized certificate.

Tailor-Made Course

We also offer tailor-made courses based on your needs.

Key Notes

a. The participant must be conversant with English.

b. Upon completion of training the participant will be issued with an Authorized Training Certificate

c. Course duration is flexible and the contents can be modified to fit any number of days.

d. The course fee includes facilitation training materials, 2 coffee breaks, buffet lunch and A Certificate upon successful completion of Training.

e. One-year post-training support Consultation and Coaching provided after the course.

f. Payment should be done at least a week before commence of the training, to Fineskill Training Center account, as indicated in the invoice so as to enable us prepare better for you.

Skills & Software Covered

Offshore Vessels Marine Operations Safety Petroleum Logistics

Programme Fee

Duration: 10 Days

Method: Online or Physical

Online Price: $2,000

Physical Price: $3,000

Certification: Accredited Certificate

View Available Dates 📄 Download Course Outline (PDF)

Available Sessions

Location

Month

Year

Oct 19 2026

19 Oct — 30 Oct 2026

💻 Online / Virtual session

Online $2,000