Oil and Gas

Training Course on Mastering Petrophysical Properties for Oil and Gas Reservoir Analysis

Introduction

The study of petrophysical properties is a cornerstone in the exploration and development of oil and gas reservoirs. Training Course on Mastering Petrophysical Properties for Oil & Gas Reservoir Analysis offers an in-depth look at critical rock and fluid properties such as porosity, permeability, water saturation, and capillary pressure, which directly impact reservoir productivity and hydrocarbon recovery. By understanding the science behind these core parameters, professionals can optimize well performance, reduce exploration risks, and increase overall field efficiency. This course is designed for geoscientists, petroleum engineers, petrophysicists, and technical professionals seeking advanced knowledge in subsurface reservoir characterization.

In today’s data-driven energy sector, mastering petrophysical analysis tools and techniques is essential for effective decision-making. This course incorporates the latest advances in well log interpretation, core analysis, formation evaluation, and reservoir modeling. Using real-world case studies and interactive simulations, learners will gain practical, applicable skills to analyze and interpret subsurface data accurately. Whether you're focused on conventional or unconventional reservoirs, this course empowers you to extract meaningful insights that drive successful energy exploration and production.

Programme Curriculum

Training Course on Mastering Petrophysical Properties for Oil & Gas Reservoir Analysis

Introduction

Learning Objectives

Define and classify petrophysical properties for conventional and unconventional reservoirs.
Analyze porosity and permeability trends using well log data and core samples.
Interpret water saturation using Archie’s equation and modern log analysis techniques.
Understand the relationship between rock texture and fluid flow in hydrocarbon systems.
Evaluate formation resistivity and its role in fluid identification.
Conduct capillary pressure analysis to determine hydrocarbon column height.
Utilize nuclear, sonic, and density logs for lithology and porosity estimation.
Apply petrophysical models in reservoir simulation and performance forecasting.
Integrate geophysical and geological data for comprehensive reservoir characterization.
Identify clay volume and its impact on effective porosity and permeability.
Estimate hydrocarbon in place (OHIP) using volumetric methods.
Perform crossplot analysis and multi-log interpretation using software tools.
Assess petrophysical uncertainties and their influence on reservoir development decisions.

Target Audience

Petroleum Engineers
Geologists & Geophysicists
Reservoir Engineers
Petrophysicists
Energy Analysts
Oilfield Technicians
Subsurface Data Scientists
Geoscience Students & Researchers

Course Duration: 5 days

Course Modules

Module 1: Introduction to Petrophysics

Definition and importance of petrophysical properties
Historical evolution of petrophysical analysis
Key physical rock and fluid properties
Classification of conventional vs. unconventional reservoirs
Overview of petrophysical workflow in field development

Module 2: Porosity Analysis

Types of porosity: effective vs. total
Measurement techniques (core vs. log derived)
Influence of mineralogy and texture
Porosity from neutron, density, and sonic logs
Case studies on porosity variation in reservoirs

Module 3: Permeability Estimation

Darcy’s Law and fluid flow mechanisms
Measurement techniques: core lab and log-based
Permeability-porosity relationship
Permeability in tight gas and shale plays
Well productivity and permeability analysis

Module 4: Water Saturation & Archie’s Equation

Concepts of Sw, resistivity index, and saturation exponent
Application of Archie’s Law in clean sandstones
Modified equations for shaly sands
Impact of Sw on reserves estimation
Log-based Sw analysis: SP, resistivity, and dielectric logs

Module 5: Capillary Pressure and Wettability

Fundamentals of capillary pressure curves
Laboratory measurements and Mercury Injection
Reservoir wettability and its impact
Leverett J-function application
Estimating height of hydrocarbon column

Module 6: Advanced Logging Techniques

Spectral gamma-ray and mineral identification
Nuclear magnetic resonance (NMR) applications
Sonic and shear wave logs for rock strength
Image logs for structural interpretation
Data quality control and tool calibration

Module 7: Integrated Petrophysical Modeling

Combining core, log, and seismic data
Use of petrophysical software (e.g., Techlog, Petra)
Building and validating petrophysical models
Generating rock typing and reservoir maps
Predicting reservoir performance and recovery factor

Module 8: Reservoir Evaluation and Case Studies

Reserves estimation from petrophysical inputs
Volumetric calculations of OHIP
Risk and uncertainty quantification
Application in field development planning
Real-world case studies in onshore/offshore fields

Training Methodology

live online instruction
hands-on exercises
data interpretation workshops
real case studies
software-based simulations for practical learning.

Register as a group from 3 participants for a Discount

Send us an email: info@fineskilltrainingcenter.org or call +254769199797

Certification

Upon successful completion of this training, participants will be issued with a globally- recognized certificate.

Tailor-Made Course

We also offer tailor-made courses based on your needs.

Key Notes

a. The participant must be conversant with English.

b. Upon completion of training the participant will be issued with an Authorized Training Certificate

c. Course duration is flexible and the contents can be modified to fit any number of days.

d. The course fee includes facilitation training materials, 2 coffee breaks, buffet lunch and A Certificate upon successful completion of Training.

e. One-year post-training support Consultation and Coaching provided after the course.

f. Payment should be done at least a week before commence of the training, to Fineskill Training Center account, as indicated in the invoice so as to enable us prepare better for you.

Skills & Software Covered

Petrophysics Reservoir Analysis Data Interpretation Oil & Gas

Programme Fee

Duration: 5 Days

Method: Online or Physical

Online Price: $1,000

Physical Price: $1,500

Certification: Accredited Certificate

View Available Dates 📄 Download Course Outline (PDF)

Available Sessions

Location

Month

Year

Oct 19 2026

19 Oct — 23 Oct 2026

💻 Online / Virtual session

Online $1,000