Introduction

Waste-to-Energy (WtE) Systems Engineering Training Course provides a comprehensive, industry-focused understanding of how municipal, industrial, and commercial waste streams can be transformed into electricity, heat, renewable fuels, and other valuable energy products. The course integrates circular economy, resource recovery, energy transition, sustainable waste management, decarbonization, and advanced thermal conversion principles with practical systems-engineering approaches. Participants explore the complete WtE value chain from waste characterization and feedstock assessment through technology selection, plant design, energy conversion, emissions control, grid integration, operations, maintenance, and performance optimization.

Designed around real-world engineering challenges, the program develops practical capabilities in anaerobic digestion, landfill-gas recovery, incineration, refuse-derived fuel (RDF), gasification, pyrolysis, waste heat recovery, energy efficiency, carbon management, environmental compliance, and techno-economic assessment. Through applied case studies, engineering scenarios, and project-based learning, participants learn how to evaluate WtE projects for technical feasibility, economic viability, environmental performance, operational reliability, and social sustainability, supporting the development of resilient and low-carbon energy systems.

Programme Curriculum

Waste-to-Energy Systems Engineering Training Course

Introduction

Course Duration

5 days

Course Objectives

By the end of the course, participants will be able to:

Understand Waste-to-Energy systems engineering, circular economy principles, and integrated resource recovery.
Characterize waste streams using feedstock analysis, composition profiling, calorific-value assessment, and data analytics.
Evaluate WtE technology pathways, including anaerobic digestion, combustion, gasification, pyrolysis, and landfill-gas recovery.
Apply process engineering and systems engineering principles to WtE facility design.
Develop energy and mass balances for waste conversion and energy recovery processes.
Assess renewable energy generation, energy efficiency, heat recovery, and grid integration opportunities.
Apply emissions-control, air-quality, environmental compliance, and pollution-prevention strategies.
Evaluate carbon reduction, decarbonization, life-cycle assessment, and climate-impact performance.
Conduct techno-economic analysis, CAPEX/OPEX assessment, financial modeling, and project feasibility studies.
Apply digitalization, automation, IoT monitoring, predictive maintenance, and process optimization to WtE facilities.
Identify occupational health, process safety, risk management, and emergency-response requirements.
Develop effective operations, maintenance, reliability, and asset-management strategies.
Design and communicate bankable, sustainable, scalable, and resilient WtE project concepts.

Target Audience

Environmental Engineers.
Mechanical and Process Engineers.
Civil and Municipal Engineers.
Energy and Power Professionals.
Waste Management Managers
Project Developers and Consultants.
Government, Municipal, and Regulatory Professionals
Operations, Maintenance, Sustainability, and HSE Professionals

Course Modules

Module 1: Waste-to-Energy Fundamentals and Systems Engineering

Circular economy and integrated waste-management principles.
Global energy transition and the role of WtE.
Waste hierarchy, resource recovery, and waste-stream classification.
Systems engineering approaches for integrated WtE facilities.
Key technical, environmental, economic, and social performance indicators.
Case Study: Integrated municipal WtE strategy combining material recovery, organic-waste treatment, and energy recovery.

Module 2: Waste Characterization and Feedstock Engineering

Waste composition, moisture, density, and calorific value.
Sampling, laboratory analysis, and feedstock variability.
RDF/SRF production and quality specifications.
Feedstock preprocessing, sorting, shredding, and conditioning.
Mass-balance and energy-balance development.
Case Study: Engineering assessment of mixed municipal solid waste for RDF production and energy recovery.

Module 3: WtE Conversion Technologies

Anaerobic digestion and biogas-to-energy systems.
Incineration/combustion and steam-cycle generation.
Gasification and syngas production.
Pyrolysis and production of fuels and carbon-rich products.
Landfill-gas capture and renewable natural gas pathways.
Case Study: Technology-selection comparison for an urban waste stream based on energy yield, emissions, cost, and feedstock characteristics.

Module 4: Plant Design, Energy Recovery, and Integration

Process-flow diagrams and plant systems architecture.
Boilers, turbines, generators, heat exchangers, and CHP systems.
Waste heat recovery and industrial heat integration.
Electrical systems, controls, instrumentation, and grid connection.
Energy-efficiency and performance optimization.
Case Study: Conceptual design of a WtE CHP facility supplying electricity and useful heat to an industrial cluster.

Module 5: Emissions Control, Environmental Engineering, and Carbon Management

Air-emission sources and pollution-control technologies.
Particulate, acid-gas, NOx, and trace-contaminant management.
Ash, digestate, wastewater, and residuals management.
Carbon accounting, life-cycle assessment, and decarbonization.
Environmental monitoring and regulatory compliance.
Case Study: Environmental-performance improvement program for a WtE facility facing tightening emissions standards.

Module 6: Digital WtE, Automation, and Operational Excellence

SCADA, IoT, sensors, and real-time process monitoring.
Data analytics for plant performance management.
Artificial intelligence and predictive maintenance applications.
Reliability engineering and asset-performance management.
Digital dashboards, KPIs, and continuous improvement.
Case Study: Predictive-maintenance strategy using equipment-condition data to reduce unplanned downtime.

Module 7: Techno-Economic Assessment and Project Development

CAPEX, OPEX, lifecycle cost, and financial modeling.
Revenue streams from electricity, heat, fuels, recyclables, and recovered materials.
Levelized cost of energy and project economics.
Risk assessment, sensitivity analysis, and scenario modeling.
Procurement, contracting, financing, and project-development considerations.
Case Study: Feasibility assessment for a city-scale WtE project under multiple energy-price and waste-supply scenarios.

Module 8: Safety, Sustainability, Operations, and Future WtE Systems

Process safety, HSE, hazard identification, and risk management.
Operations, maintenance, reliability, and workforce competency.
Community engagement and social sustainability.
Net-zero, carbon-negative opportunities, circularity, and resource recovery.
Future technologies, policy trends, and scalable WtE systems.
Case Study: Development of a resilient, low-carbon WtE master plan integrating energy recovery, recycling, organics treatment, and emissions reduction.

Training Methodology

Interactive lectures and presentations.
Group discussions and brainstorming sessions.
Hands-on exercises using real-world datasets.
Role-playing and scenario-based simulations.
Analysis of case studies to bridge theory and practice.
Peer-to-peer learning and networking.
Expert-led Q&A sessions.
Continuous feedback and personalized guidance.

Register as a group from 3 participants for a Discount

Send us an email: info@fineskilltrainingcenter.org or call +254769199797

Certification

Upon successful completion of this training, participants will be issued with a globally- recognized certificate.

Tailor-Made Course

We also offer tailor-made courses based on your needs.

Key Notes

a. The participant must be conversant with English.

b. Upon completion of training the participant will be issued with an Authorized Training Certificate

c. Course duration is flexible and the contents can be modified to fit any number of days.

d. The course fee includes facilitation training materials, 2 coffee breaks, buffet lunch and A Certificate upon successful completion of Training.

e. One-year post-training support Consultation and Coaching provided after the course.

f. Payment should be done at least a week before commence of the training, to Fineskill Training Center account, as indicated in the invoice so as to enable us prepare better for you.

Programme Fee

Duration: 5 Days

Method: Online or Physical

Online Price: $1,000

Physical Price: $1,500

Certification: Accredited Certificate

View Available Dates 📄 Download Course Outline (PDF)

Available Sessions

Location

Month

Year

Oct 19 2026

19 Oct — 23 Oct 2026

💻 Online / Virtual session

Online $1,000